8 minutes ago · Tech · hide

I typically disable wifi powersaving on devices that are acting as servers instead of clients. Here’s how. NetworkManager Raspberry Pi defaults to using NetworkManager for their networking now, so use this if you’re using their OS. Or any other NetworkManager machine. Do this as root: mkdir -p /etc/NetworkManager/conf.d printf '[connection]\nwifi.powersave = 2\n' | tee /etc/NetworkManager/conf.d/powersave.conf chmod 600 /etc/NetworkManager/conf.d/powersave.conf “2” apparently means disable powersave. I think 0 is do not manage powersaving, and 1 is explicitly enable it, but I might have those swapped. We’re not here to turn it on, we’re here to turn it off, so I do not care. Then reboot or restart NetworkManager. This should apply to all radios. I don’t know if you need the chmod but when I was reading forum posts on the raspberry pi forums, someone had the chmod in there, so I did it on my thing too. Doesn’t hurt, anyway. iw (for wpa_supplicant or manual config) wpa_supplicant does…

Commenting on Bubbles has been removed. Why? If you want to talk about this post, write to the author, use the comments on their blog if it has them, or reply with a "RE:" post on your own blog. Suggestions? feedback@bubbles.town