1 day ago · 7 min read1422 words · Tech · hide

Introduction This article explains how I setup FreeBSD systems nowadays. My use case is mostly to have a FreeBSD rescue handy at cheap VPS providers that do not natively support FreeBSD, and protect my data against providers that might not properly erase disks when I stop using a VPS. Remote unlock over SSH is for convenience. This is achieved by creating a small unencrypted ZFS pool that holds /boot and a minimal FreeBSD system that will be called the outerbase in this article. On boot, I SSH into it and unlock the GELI partition of the main system and then perform a soft reboot into it. Bootstrap the FreeBSD installer on a local virtual machine Create the RAW hard drive image for your virtual machine. Using the minimal necessary size will speed up later image transfer if it needs uploading to some VPS or cloud provider. At the time of this writing, a minimal system seems to fit in about 4GB, but feel free to use a bigger image if you do not intend to transfer it later. qemu-img…

Commenting on Bubbles has been removed. Why? If you want to talk about this post, write to the author, use the comments on their blog if it has them, or reply with a "RE:" post on your own blog. Suggestions? feedback@bubbles.town