4 hours ago · 5 min read1035 words · Tech · hide

The Eight Sleep Pod 3 control board with the daughter board and SD card removed. The Eight Sleep hardware team was very generous with the amount of thermal paste between the boards.I’ve been meaning to root my Eight Sleep Pod 3 since the large AWS outage in late 2025.1 During the incident, myself and all other Eight Sleep users were unable to control a simple machine sitting at their bedside due to problems on servers thousands of miles away. That outage is part of what pushed me to write about ownership last year. My main source of information for this project were the free-sleep open-source app and Bo Lopker’s ZeroSleep article. The free-sleep app is compatible with a wide variety of Pod versions, so if I ever buy a newer Pod, I can root that one too. To get root on my Pod I had to patch the firmware archive stored on the SD card, which the Pod uses to configure itself after a factory reset. If you hold the smaller button on the back while plugging in the power, the Pod starts up…

Commenting on Bubbles has been removed. Why? If you want to talk about this post, write to the author, use the comments on their blog if it has them, or reply with a "RE:" post on your own blog. Suggestions? feedback@bubbles.town