4 hours ago · Life · hide

In a post from a year ago (Bike Light – Downtube – White LED Strip) I ended musing about using COB LED strips for a downtube bike light. Well, I wasted about 10 months thinking about it then had to build it before DST hit. Since the whole thing was a rush job I don’t have a lot of good photos but I’ll share what I’ve got. I decided on a shorter strip because the old one was a little long and blocked the charging port. I made it about the right size to print just two pieces of plastic on a 256mm x 256mm print bed. The strips have adhesive backing so I just had to stick them down to the plastic and solder two wires in place since I was running one single strip at 5 volt from a USB power bank. I cut a USB cable just the right length and soldered that in place to power the strip. I don’t have a photo of it but I added a giant glob of hot glue one assembled to make it waterproof. I also glued both pieces together so there’s no easy way to open and repair this. (It shouldn’t need repairs as…

Commenting on Bubbles has been removed. Why? If you want to talk about this post, write to the author, use the comments on their blog if it has them, or reply with a "RE:" post on your own blog. Suggestions? feedback@bubbles.town