Engine stall fix: Citroën 2.0 HDI 150

car maintenance Engine stall fix: Citroën 2.0 HDI 150 Simple, zero-cost fix https://khleedril.org/blog/2026-11-13--dirty-cam-sensor.html khleedril.org/2026-11-13--dirty-cam-sensor Dale Mellor https://khleedril.org/dale-mellor 13th November, 2026 Too long, donʼt read. The car engine cut out without warning. The problem was iron filings on the Hall-Effect camshaft position sensor. While I dismantled half the engine investigating, it turned out I only needed to remove one retaining screw from the top of the engine block, extract the sensor, give it a good wipe, and then put it back in. Car is running perfectly again. Recently the engine cut out on the car without any warning. Nothing dramatic, it just decided of its own accord to stop running. When I tried to get it started again, all the alarms went off including Bad transmission and Failed ESP (anti-skid)—the car has a tendency to do this when a nasty fault is detected to give the driver more reasons, hence more encouragement, to stop…

Commenting on Bubbles has been removed. Why? If you want to talk about this post, write to the author, use the comments on their blog if it has them, or reply with a "RE:" post on your own blog. Suggestions? feedback@bubbles.town