LGB bubble wagon repair

While visiting Footplate Models a few weeks ago, Richard presented me with an LGB bubble blowing wagon. In pieces. "This will be great for the Marble Express at your shows", he said. I can't disagree, but first, I needed to put it back together. A quick look and it became apparent that someone had taken it apart to deal with the battery box, the contacts of which are as furry as my cat. I had a little poke, but it was beyond saving. Plan B was to fit a new battery box, and I reckoned that a AAA box would fit in the space the original four AAs did. All this would be a waste of time if the motor didn't work. It's a double-ended unit with a fan and gear on each end. Fortunately, all was well, so I just needed to figure out where the power should be fed into the switch. This took a couple of goes, but with only a modest amount of bad language, I managed to solder the wires in place. And then realised these wires were too short if I wanted to slide the box out to change the batteries. Good…

Commenting on Bubbles has been removed. Why? If you want to talk about this post, write to the author, use the comments on their blog if it has them, or reply with a "RE:" post on your own blog. Suggestions? feedback@bubbles.town