console/entry table pt X..........

Had a good day in the shop if being confused with what was at the top of the A list. I wanted to work on the bottom stretcher details and that quickly went south on me. I think I spent twice as much time scratching the bald spot then I did doing anything constructive. By the time I killed the lights I was looking forward to heading topside. I think I figured out how this puzzle of a console table will go together.step oneI got the bottom aprons dry fitted so I could mark the inside/outside and the top/bottom. I had to cut a dado on the inside face for the bottom cross stretcher.yikesThis sucks pond scum but at least I found it before I tried to glue it up. The left apron has the inset but the right one doesn't.found it.The two need to be shifted over to the right and up. When I flipped this to drill the holes on the opposite end I turned it the wrong way and flipped the reference face 180. Initially I sawed off a new board to get two new aprons before I realized I could fill in the…