Swindle for CH32V003 : Try it out !

Link to a snapshot of the CH32V003 aware version of swindle for the RP2040Gunzip the uf2 and do as usual to flash the rp2040 with the uf2.YOU ABSOLUTELY NEED A 1KOhm RESISTOR BETWEEN IO and 3.3v!Pinout :-CH32 IO pin : GPIO13 of RP2040 (+1K pullup to 3.3v!)-CH232 reset : GPIO10 of RP2040 (optional)- Ground!To use you need to setup gdb the following way (~ same thing with vscode)target extended-remote /dev/ttyACM0 (name of the CDC device)set remotetimeout 500000monitor sdi_scanset mem inaccessible-by-default offset confirm offattach 1loadcompare-sectionsIf you see "Detected CH32V003 chip with 16 k flash, 2 k ram", it works!.Nb: It does not work very well with CH32V006, looks okay for CH32V003

Commenting on Bubbles has been removed. Why? If you want to talk about this post, write to the author, use the comments on their blog if it has them, or reply with a "RE:" post on your own blog. Suggestions? feedback@bubbles.town