Leo's bookcase pt V and a pic frame pt II.........

oopsIt would appear I made a me-steak in the order of operations. I should have routed the rabbet for the back before I glued the shelves in. I can still do it, it will just take a little more time and involve a little chisel work.leveling the back of the frame.The goal I had in mind for the frame was to get the primer coat on it. First I had to level and flush the back miters. I couldn't do the front ones because I would have planed into the beads and flattened the top. Instead I sanded and feathered those joint lines by hand. back frameNailed and glued off the top and the sides and then trimmed/fitted the bottom leg. I was close to getting the primer coat on. I had to add some wood putty to a bead that had a chip missing. It was in the corner and it was too visible and had to be built up. planed the mitersInitially I was going to nail and glue the back frame together off the saw. However, a couple of corners were long and it was easier to plane them then to try and saw off a thin…