72 days ago · Life · hide · Fediverse post

hmm........First thing in the AM I checked the squareness of the carcass. I had squared it up yesterday and left it as is overnight to cook. The left side, top/bottom, was square. The right side was a wee bit off. Not much and visually I can't see it.the top securedThe top was glued down in spite of me having doubts it would be. I had used hide glue for this and the top was down tight to the sides. I used four Miller dowels on each side. need to remove this to the lineI didn't notch the sides to fit in the top stopped dadoes, instead I dead ended the sides into the ends of the dado. I purposely left it long so the sides would be tight against the ends. I had thought of sawing it off before I glued and nixed it. Decided it was better to leave it long and then plane it off. It is/was only an 1/8".checkingI still have to rout a rabbet for the back so this needs to be straight and flat from side to side. hmm.......Got it straight and flat but not square. I had to plane it by going from…

Commenting on Bubbles has been removed. Why? If you want to talk about this post, write to the author, use the comments on their blog if it has them, or reply with a "RE:" post on your own blog. Suggestions? feedback@bubbles.town