91 days ago · Life · hide · Fediverse post

working on the slatsGetting the length between the rails and adding 5/8" for the mortises. I sawed the length of the slats 1/8" less then the OAL.3 down with 2 to goCleaned up the four edges of the slats with planes and then fitted the top mortises first. For the most part the mortises were fairly close and I only lost one slat. I had planed it like the previous 4 but it came up short on the R/L of the mortise. I checked and it was too loose for the remaining 6 mortises. first side done (right)I got the bottom rail on backwards but it didn't matter because the dowel holes are centered on the ends. I'll correct this when I do the glue up. left side slatsWash, rinse, and repeat for the other side assembly.I'm not coughing much in the shop but it still happens. I have noticed that I am a lot slower than I used to be. Not helping much with me pulling my head out of my arse and making stupid me-steaks though. (like above) Working slower and not as long anymore. But as long as I can trot…

Commenting on Bubbles has been removed. Why? If you want to talk about this post, write to the author, use the comments on their blog if it has them, or reply with a "RE:" post on your own blog. Suggestions? feedback@bubbles.town