poor man's miter box(es).........

hmm.......Liking the look of the finish so far on this frame. One spot that isn't cooperating is the flats on the beads. I had to tilt the the frame to get coverage in there. It took 3 coats to barely cover it.painting is doneI'm calling this pic frame done, paint wise. It was still sticking to the blue painters tape so I'll let it hang out on the dryer for a few days. Once it isn't sticky anymore I'll spray on a couple of coats of shellac.poor man miter box stockGoing to try something different this time. I will start with making two boxes with 1/2" oak plywood and a scrap of 5/8" pine. I have a couple of 1x12 pine boards but I'm holding them for later. If these two work, I will make at least one more box with it.first boxGlued the back stop to the platform and clamped it to the tablesaw fence. It is dead nuts 90 between the two. I let it set in for 15 minutes and then screwed the back to the platform. The fence was long enough to clamp both boxes to it.another jigThis is a sawing…