maintenance day........

sighThere are two miters that slipped by each other. This corner is the worse and the one I had noticed yesterday. It would seem that using my fingers to keep the bottom flush didn't work worth diddly squat.almost perfectThis scrap of pine was left over after making the bandings. It is one frog hair below the lowest misaligned corner. I used it to to plane the height of the inside bandings down to it.outside bandings dry fittedNo hiccups this time - got all four bandings on and fitted the first time. I didn't have to make another one as an oops. glued and cookingI did the outside bandings a different way this time. Usually I take all the bandings off and glue (nail or clamp) them back on one at a time. This time I left the first 3 bandings still clamped and I glued/nailed the last one I fitted. I then unclamped the 3rd banding I dry fitted and glued and nailed that one. Washed, rinsed, and repeated it for the last two. I will do bandings like this the next time. No surprises with open…