hardware dresser, 2nd to last post.........

switchedThe metal knobs were too large (IMO) for the dresser drawers. Decided to use one shaker knob per drawer. All of the tenons on the knobs were about a 64th over 3/8".quick jigThe tenon length was 3/4" and the drawer fronts were a 1/2". This jig allowed me to saw the length to a little less than a 1/2".doneI centered the knobs on each drawer front and it looks good to my eye. I found a site that sells shaker knobs. It is wood-dowel dot com. I was able to get three of the sizes I use the most. The one size that wasn't available was the largest but I don't use that size often. I'll check back on it occasionally to see if they pop up.hmm.......I have 31 containers to transfer to the drawers. I have 51 compartments available to fill up. There are 7 containers that are wood screws that I am not putting in the hardware dresser. I intend to put machine and metal screws only along with washers, nuts, etc.new frame projectI don't remember where I saw this but it was (email?) about a…