hardware dresser pt XV........

last nightGot the bottom glued and nailed first. Then I sawed the dividers and installed them. One corner of the drawer was up slightly so I weighed it down with paint cans overnight.hmm......This plastic container came with 100 screws - it now has 92. It fit in 3 of the compartments I checked. Note to self - next dresser comes with 12 compartments.off cuts These off cuts are from when I thinned the drawer parts to a 1/2" thick. They are a wee bit wider and longer then the drawer fronts. Not only would they cover the plywood bottom, they will cover the dovetails.first drawerSqueezed in getting the off cuts glued onto the five drawer fronts. I'll be able to play with them when I get back home from the VA.3 down, 2 to goThe glue up went off without any hiccups. One drawer will require some wood putty work. One corner of the drawer front has a big chip missing.confirmedI had set the miter gauge but almost an inch too much. Maybe I'll get lucky and find some odd shaped/long hardware that…