last bottom drawer railI was waiting for the glue to set but stopped that. With three nails, and no stress on the rail, I just kept on installing them.doneAfter a snap of my thumb and forefinger all ten drawer guide rails were done. The back will stay off until the drawers are made and fitted.hmm......I was wrong about gaps on these. A couple here on the left side have closed up. When I clamped the rails all four had gaps.right sideI thought the right side was good with no gaps. After they have cooked, a couple of gaps popped up. goneI couldn't think of any way to remove the glue from the gaps to insert shims so I filled them all in with wood putty.Lowes runSqueezed in a Lowes run when my wife needed to go to Michael's craft store. 1/2" and 3/4" plywood for the miter jig and cove molding for the hardware dresser base.hmm......This cherry is from a base that went south on me. I sawed off the pins/tails and I'm going to make a practice frame with it. It will be the first one off the…
No comments yet. Log in to reply on the Fediverse. Comments will appear here.