Miles's frameThe front face has only one coat. I was surprised at the coverage too. I'll bet the ranch that I can get away with two coats. A couple of coats of shellac, I'll be able to get this to the Frame it shop by saturday at the latest. Leo's desk topJust did a quick flush of the glue joints with the #3. I only did this side which will be the face. I'll do the back side when I am ready to get it to final size. hmm......Ready to flush/plane all the epoxy on the side rails. All of them were still overfilled, no sunken areas anywhere. sigh (blurry pic again)This is the biggest epoxy spot and after I got it flushed, a hole popped out. Not a bubble hole and it is visible despite the small size of it. I'll fill it in later. lower right cornerI like the reddish background against the black epoxy.done All four side rails flushed. Another small hole shook hands with me that I'll have to deal with. Three of the rails are about the same - the 3rd one down from the top - doesn't have a…
No comments yet. Log in to reply on the Fediverse. Comments will appear here.