easy table top clip installationI still have to put in 4 more clips but I was surprised by how strong the clips I did install were. The top was tight to top of the rails and easy to pick up and move around. And no headaches with getting the last four done - nothing in the way of that. bottom shelfThe shelf is flat and tight to the bearer with two clamps holding it down. Nothing moved when I screwed it. No glue - just one screw at each end. This way any repairs will be easy.6 ounces of shellacRunning out of shellac so I mixed up a new batch. 6 ounces of shellac and 3 cups of alcohol giving a 2lb cut. Turned out that I didn't need this because I had just enough from the last batch to finish the table.splinesI don't want to rely on the miters staying together even with the help from the top/bottom panels being glued in the grooves. Going with 1/8" thick cherry splines to help out the miters.WOWWent to the Frame it Shop before lunch and this is all that was ready. I think this looks…
No comments yet. Log in to reply on the Fediverse. Comments will appear here.