Leo's desk is done........

first one fittedOff the saw the pins and tails were too snug. It took a while before I got it to come together.hmm......Tried sawing the pins a different way and it didn't work out. All of the left side cuts were tapered. Some I could straighten and remove, a few I couldn't. better picI usually saw the left vertical saw cut by looking at the saw on the right side. These cuts I looked on the left side of the saw as I made the cut. I sawed the other end cuts the way I usually do and had better cuts. Need more practice sawing on the left.sighThe glue up looked good but it is a wee bit short. Note to Self - double check eyeball measurements with a rule/tape.off the sawThis side was easier to fit. It fit off the saw but I wasn't happy with the tightness of the pins and tails. I didn't think I would be able to glue it up with yellow glue. I felt the glue would swell the pins/tails and make it impossible to seat the two. Trimmed all the pins with a rasp to loosen the fit.yikesHad a brain…