Almost got the table glued up but it didn't happen boys and girls. No life alternating glitches or brain farts stopped it, just the work flow didn't go as fast as I thought it would. Maybe tomorrow I'll get it glued and cooking. All I have to do besides some mind numbing sanding is to glue up the bottom shelf. Miller DowelsPut two dowels into the shelf from each end. I didn't put any in the back slats. The bottom shelf will keep the bookshelf together. The back slats were fitted snug into the mortises with glue. I doubt that they will ever give up the ship. epoxy clean upThis isn't 100% cleaned up but close. It looks good with no bubbles and the color is uniform through out.table top epoxy fillThe epoxy shaves off easily even with a dull iron. the opposite faceThere is a void on this side. Debating whether or not to fill it in. This is the underside and will never be seen. hmm.......sigh.....I was planing the burn marks off and both stretchers bowed on me. The left one you can see.…
No comments yet. Log in to reply on the Fediverse. Comments will appear here.